- Thickness: .040 plus or minus .005
- Size: 4' x 8'
- Machine Surface Sand: 150 grit
- (Bending Radius) Flexibility: 2-4"
- Recommended Glue: Solvent-based contact (flexible glue line), Urea formaldehyde cured in a press (rigid glue line)
- Variation can be expected from sheet to sheet and lot to lot
- Inspect material for satisfaction of quality and grade prior to lamination
- All veneer should be acclimated prior to application
- Ideal temperature for application is 70-80° F
- Ideal humidity is 35%
- Surface must be clean, dry and smooth (free of dust, grease, wax) to ensure a good bond
- Use of solvent-based adhesives is recommended. Water-based adhesives are not recommended
- Veneer scrapers are recommended for hand application to allow for maximum pressure. "J" rollers are not recommended
- Adhesive should be allowed to cure for 48 hours prior to finishing